Dear webmaster: I am trying to get the glove box out on my 210 e300d. I have removed the 4 screws facing me and also found 2 more on either side of the light fixture which access vertically through a hole on each side of the light.

1: are these screws involved with the removal or should I replace them first. (the two vertical ones)
2: I am unable to decide how to remove the light lens cover as it appears likely to break if not done properly.
3: the glove box appears to be held upper cental area but can be slid from side to side a little. Suggesting that there are tabs on it.
4: What to do about 1,2,3. and/or how to get the whole thing out correctly.
Thanks, Harvey

__________________
hlg