|
There is various types of easy out type tools. in your case the shoter ones similar to in the attached picture would likely work. Some of them have coarser splines then the ones in the picture.
If you are speaking of the bolts holding on the Axle to the flange on the differential you could also grind off the head of the bolt. When you pull off the axle there sould be enough bolt shaft left to get a vice gripes on it.
Often when you grind the head off you find that the bolt itself is rather loose.
If it is badly rusted in yo can use penatrating oil and heat with a propane torch to hep loosen it.
__________________
84 300D, 82 Volvo 244Gl Diesel
|