|
To set up the linkages properly, disconnect them and pu the transmission in neutral (you'll feel each selector click into the neutral detent) and the shifter in neutral and slide a pin (4 or 5mm allen key worked) through the alignment hole (shown in the drawing) so the shifter levers are all in neutral position and then adjust the linkages to suit. Remember to pull out the alignment pin when done.
__________________
CC: NSA
All things are burning, know this and be released.
82 Benz 240 D, Kuan Yin
12 Ford Escape 4wd
You're four times It's hard to more likely to concentrate on have an accident two things when you're on at the same time. a cell phone.
www.kiva.org It's not like there's anything wrong with feeling good, is there?
|