Glad it worked out O.K. for you .
I recently used an electric impact tool, it chattered a while before teach screw backed out .
I used the same America made SEARS hand impact tool since 1970, it recently wore out after all those years of Commercial use .
Remember : when using an impact tool you need to SMACK it with a BFH, not tap it with a Chinese hammer .
When drilling out these screws use a 7MM bit , a left handed one is a plus but not necessary .
__________________
-Nate
1982 240D 408,XXX miles
Ignorance is the mother of suspicion and fear is the father
I did then what I knew how to do ~ now that I know better I do better
|