|
If this is a 210mm diff I have 6 sizes of side case shims.
1.526
1.202
1.863
1.908
1.490
1.509
I guess what you are calling the hubs are what I call the axle flanges. I also have 6 sizes of axle flange rings. No need to put your axle flanges on the lathe. These rings are also selectable and I have 6.
3.072
2.928
2.797
3.110
3.103
3.019
No sense in getting MB side bearings as they use standard Timken available everywhere. You will probably have to buy the race and cups separately.
As far as removing side cover bearings the OTC puller 4534 will do the job with a few minor modifications.
I had to make a new center ring with studs to pull the jaws in closer or spread them out in the case of the outer races. See the first post in my differential tool build ideas showing this puller being used to pull the races out of the side covers.
Let me know if you need anything I can work something out.
|