|
Connect 722.6 Transmission to Electronic Speedometer
Does any one need any hardware to get there old electronic speedometer working with a 722.6 Transmission swap.
I will be getting quotes on having these wheels made shortly. They install on the front side of the transmission output flange. I will probably need to order a minimum of 5 so the more people interested the cheaper they can be made.
These will be made from 4140 steel heat treated to 1040 MPa, Just like a 10.9 bolt. They will be powder coated black or possibly some other corrosion resistant coating. I will have to see what they have to offer.
This current set is for the 3 web flange only. Unfortunately it is not possible to make one that works with both 3 and 4 webs. So I would need to put up a separate quote for a 4 web design.
These are for use with a hall effect sensor and will require a simple 3 component circuit board to be soldered together for installation. They may also work with a VRS sensor which can be directly wired,but success with that has been limited so far.
|