Quote:
Originally Posted by Frank Reiner
hb:
Did the lack of power problem occur immediately after the transmission was exchanged, or was there a period of time after the trans change during which power was normal?
|
No, the problem appeared right after the transmission was replaced, and never happened before.
There is an update: Timinig is not determined to be 20 degrees ATDC, way off. I suspect the flywheel was reinstalled incorrectly after the main seal was replaced, though the mechanic said it was virtually impossible to mis-align the flywheel because of a notch that needs to be matched up with it. But he is willing to pull the tranny to check it out...