Quote:
Originally Posted by Diesel911
Is this still your location; London, United Kingdom? Bosios are made in Italy.Also you did not say what engine they were for.
|
Yes sir, still the UK and I shared that its for the 617 Normally Aspirated motor (from my 84 W123)
After I pulled the injectors from my other vehicle - a 76 240D W115 with <80K miles on it - I was surprised to see substantial cratering of the factory original nozzles as I expected that level of wear to occur well above 100K miles. (This may explain why I need to provide throttle on cold start despite good compression and no oil consumption). I shipped the injectors, new Monark nozzles and lift pump to the Grezzer aka the "Injector Guru" for a rebuild.
My next project is to pull the W123's injectors for inspection but don't want to do this till I have found the best replacement set. Grezzer aka the injector guru has shared that the Bosio nozzles slightly outperform Monark in terms of fuel flow (which are still available here in Germany somehow).
I'd like to try to get a set of the Bosios if I can!