Yup Dug it out and the Screw was indeed under what looked like J B Weld
that Gray color . First one ( Screw ) came right out . is the same size Thread but the Diameter head of the screw is smaller.
Second Screw would not budge so I had to drill out the Head off then lift off the Top Cover of the carb then removed the screw vice grips .
I bit of damage from the Drilling but I think the Carb well work if I reseal after reassembly.
Any Place you can just buy the Mounting Gaskets Carb to manifold and replacement " Secondary Vacuum Diaphrams " .
I Soak the Carb Body's in Gasoline before disassembly overnight and it seems to keep the Gaskets from tearing upon Tear Down a experiment
As all the rebuild kits I see online don't have any Accelerator Pumps in the kits ? well then hummm .
Thanks for the reminder , Knowledge , of those screws
|