The brackets I originally received are a little too big, so sourcing the right sized ones now.

Once I bolt this in, and verify it fits like a glove (which it does -- just need different brackets), then I will be taking deposts.

Remember, you're going from 13mm (original) to 15.87mm which is a hair bigger than the upgraded flavor which was found in fleet vehicles back in the day.

The upgraded, modified, i.e., .87mm larger than the thicker sway bar, comes powder coated in a pretty damm close to MB chassis black which was tough to accomplish.

As pictured, the 13mm is a little "thicker" because of crud and the slight angle the calipers are sitting. The new one is a little thicker than 15.87mm because of the powder coating and the angle of the calipers.

DO NOT make the mistake I did and remove the bubble wrap protective wrap during your install since you will scratch up the brand new sway bar.