ATF Levels After performing a transmission service, refilling the ATF it can be confusing as to where on the measuring stick the level is supposed to be, especially since it is cool or cold. Fill until the level is about 10mm below the LOW mark.

Go drive the car for about 20 minutes and then recheck. The ATF level should be between the high and the low marks.

BTW, the amount of ATF required to move the level from the low to the high level is not a lot of fluid. Try adding in increments of about 4 fluid ounces at a time.

The your tips coming,

Haasman

__________________
'03 E320 Wagon-Sold
'95 E320 Wagon-Went to Ex
'93 190E 2.6-Wrecked
'91 300E-Went to Ex
'65 911 Coupe (#302580)