View Single Post
Old 05-20-2003, 10:04 PM
Senior Member
Join Date: Sep 2002
Location: New Jersey, U.S.A.
Posts: 2,398
Don't panic. It's not as bad as it looks! The upper radiator support/cross-member can be loosened and set to the side. This will give you enough room to remove the fan. Just remove the six 10mm bolts(three on each side), as well as the two in the center, in front of the A/C condenser. The hood release cable can be left alone. The upper radiator support can then be lifted up out of the way. The radiator can then be tilted forward enough to allow you to remove the fan safely. I know it's tight, but it works. I've done it hundreds of times. Let us know how it goes.
Reply With Quote