Quote:
Originally Posted by JHZR2
No doubt those things will be in there tight... but the level of deconstruction if the rear was going to determine if I would buy the questionable and cheap Meyle bushings, or try for a quest to find NOS MB or Lemfoerder.
That’s what I needed to hear, thanks!!
|
I don't remember what makers sub frame bushings I used.
Over 10 years ago I bought a front end kit and it was all URO parts. I used it and the URO upper control arms and Lower control arm bushings are still in use and OK.
I don't know why a front end kit came with rear trailing arm bushings and I changed them and the plastic sway bar links; I used them.
I am not recommending cheap parts just passing on my experience.
To get the sub-frame bushing out I used chisels as wedges to move them out till I could get a better pry bar on them.