Your post did not include a link.

I have searched using different names. Shims, shim washers, shim rings and now arbor shims. Most end up at same sites. I need a source in my town, or that could ship here quickly. Rules out USA.

I found tons of inch sizes, but not so many metric. 1 1/4" is too small. I did find that 32x45mm was common but even that not same as the 32x43 MB shims. Hard to trim thin material like that if that would be needed.

I will keep checking, but just hoping existing will be close.

__________________
Graham
85 300D,72 350SL, 98 E320, Outback 2.5