flipped the condenser over, luckily the hoses still reached.
added about 3 oz of pag to the compressor fill hole.
hooked it all back up, drew a vacuum, let it sit for an hour, then filled with duster(152a)
I used the pressure method to fill, IE, get it to a stable pressure, keep an eye on the high side for fast increase.
my pressures stabilized at 50/200. I didn't totally fill the system, because my high side stabilized and didn't move for at least half a can (5oz).
when rev'd, high side is 250. it was about 90*F outside.
I could probably add a little more, but I don't think it needs it, I'd rather have a little less reserve, than too much and spike the high side.
90*F outside. AC is cool at idle, and COLD running down the road.
The Sanden compressor is awesome!
easily half the drag or less compared to the York.
will post some pics later.