ME9.7, ME2.8, EDC16 ECU Cloning Service
Need a new ECU and dont want to pay outrageous Mercedes prices for an OE unit? I can clone your ECU into another used module for significantly less cost without the need for any additional programming.
The jist is that you need to procure another matching ECU from ebay or the like and send it to me along with your defunct ECU. I will read the data from the bad ECU and write it into the good ECU. This includes the EPROM which contains the immobilizer data as well as the flash and microcontroller memory. With all the data transferred the replacement module will literally be plug and play. No additional coding or programming needed.
I charge 100$ USD for the cloning service. With ME9.7 and EDC16 the covers are glued on and I charge 75$ to remove the covers. With a little heat and patience you can remove the cover yourself and save the additional charge. I charge a basic 20$ shipping fee with a difference of more than 5$ actual cost billed or refunded as needed.
PM me to get the process started.
__________________
90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start
90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff
Last edited by duxthe1; 11-01-2020 at 12:46 PM.
|