View Single Post
  #2  
Old 06-10-2003, 12:45 AM
DR.DIESEL's Avatar
DR.DIESEL DR.DIESEL is offline
Senior Member
 
Join Date: Mar 2003
Location: Puget Sound, Washington St.
Posts: 522
Should be 6mm. Either your tool is worn down or the bolts have been hogged out in the past. Be carefull, If you round one out,
life will become very painfull. I put some valve lapping compound on my allen tools to prevent them from slipping under pressure.
this seems to work pretty good for me.
Good luck.
DR.D
Reply With Quote