Quote:
Originally Posted by Diesel911
It is the other way around the Camshaft with towers and Rocker arms are removed. What is happening is the 4-5/8 inch height is causing it to tilt side ways when I use 2 hands on the breaker bar handle. On the ones that loosened it did not get a chance to tilt much. On the 2 stuck ones it tilts.
If I shorten it it is not going to tilt much.
|
1) Give a thought to fabricating a T-handle 1 1/2 feet on each side. A T-handle eliminates the tilting force.
2) Insert a 3/8" diameter drift into the top of the bolt, and hit it hard with a hammer. That impact acts to release some of the tension in the bolt.