View Single Post
Old 05-31-2021, 02:52 PM
coachgeo's Avatar
coachgeo coachgeo is offline
Registered User
Join Date: Jan 2003
Location: Southern OH
Posts: 1,800
Originally Posted by ROLLGUY View Post
... the SL has the bolt going through the aluminum piece cast into the rubber of the mount, and goes completely through the mount arm (not just threaded into the aluminum arm).....Rich
my engine mount arms... are not be from an SL but from the W123?. the arm; the mount bolt goes into is threaded,... though guessing you understand that.

Just an FYI.... the mount bolt goes up into the filled one and/or the OEM one ....but it at actually bottoms out at the TOP of the pyramid's tip to snug it into place..... bolt head sits into a counter sunk recess in the metal at the tip of the pyramid. ... but am guessing you know this.

part of what theoretically should help with the filled mounts on preventing torque lift of engine.... is if passenger side is also filled... driver side will have a hard time lifting cause it cant push passenger side down.
"If anyone knows other lessons I need to learn, please tell me. I'm tired of learning them the hard way".
by JerryBro

The Glow Plug Wait: This waiting period is a moment of silence to pay honor to Rudolph Diesel. The longer you own your diesel the more honor you will give him". by SD Blue

My normal daily life; either SNAFUed- Situation Normal... All Fouled Up, or FUBARed- Fouled Up Beyond All Repair

62 UNIMOG Camper w/617 Turbo, 85 300SD daily driver- both powered by blended UCO fuels

Last edited by coachgeo; 05-31-2021 at 08:30 PM.
Reply With Quote