Quote:
Originally Posted by skeppa12
Thanks for the links guys.
The sway bar mount itself looks solid but I will take off the rubber bushing and see where I stand. Am a bit worried about finding the right panel for the fender liner to attach to to fill the front of the rocker. Will search the forum to see if anyone has repaired this previously to get an idea of the approach to take.
Patching up the holes also doesn't look like too bad of a job and I do have some experience with POR15.
|
If you go with structural adhesive, you can form patches with 22ga (or thicker) steel, including galvanized (which you can’t weld because of toxic fumes, as I understand it).
Just template with cardboard or paper, use an angle grinder to cut the steel, then brakes and hammers.
__________________
Current Diesels:
1981 240D (73K)
1982 300CD (169k)
1985 190D (169k)
1991 350SD (116k)
1991 350SD (206k)
1991 300D (228k)
2008 ML320 CDI (199k)
1996 Dodge Ram CTD (442k)
1996 Dodge Ram CTD (267k)
Past Diesels:
1983 300D (228K), 1985 300D (233K), 1993 300D 2.5T (338k), 1993 300SD (291k)
|