Quote:
Originally Posted by Frank Reiner
"Complete control" - By what means? What hardware is involved?
From your signature Mr. Rital24:
Mercedes 300 CE 24v 199 black
Rotrex C30/94 SC
FrankenCis fuel contol
stock ignition system controlled by Microsquirt
Dualfuel Gas/Lpg
722.5 transmission
How did you do it?
|
You need a microsquirt ecu, the frankencis unit, a O2 wideband sensor, a map sensor, rpm signal,air and water temperature for to start.
(I'm talking about the KE Jetronic version.)
If you want you can control also the ignition timing with megasquirt, for to do this you have to install a trigger wheel on the crankshaft pulley.
If you want a fuel pressure sensor, a throttle position sensor are also options.
The fuel system remain the original one with its injectors, distributor etc, as the ignition system, coil,cables etc.
Using "tuner studio" installed on your portable pc to interface with microsquirt you have the complete control over fuel system and Ignition timing, if you want.
Tunerstudio is the software used for the settings and to tune your car on the street or on a dyno.
The Frankencis unit itself is a little black box that is electrically connected between microsquirt and the EHA valve.
To know more there is a section on this platform with all the questions answered:
Digital WUR plus? ( FrankenCIS ) - Pelican Parts Forums