Used a parachute type cord and wrapped it in the body side of the gasket twice it case the cord got cut. Had helper push glass inward whilst pulling the cord, worked like a charm.

DON'T bend the moulding, cut it completely out vs pulling it out.

The gasket goes on the glass, the moulding goes in the gasket, the cord goes in the body groove of the gasket and then we lubed the gasket with soapy water.

Keep the glass UBER centered during the install. If it gets off center stop and fix it.

__________________
"Rudeness is a weak man's imitation of strength" - Eric Hoffer