View Single Post
Old 11-12-2003, 03:02 AM
vinamg vinamg is offline
Registered User
Join Date: Dec 2000
Posts: 368
You don't need to remove the fan clutch to install blade. Blade is held by three 5mm allen bolts. Just remove shroud so you can reach them. You also need to slip a "tool" behind the clutch to stop it from spinning (at 1 o'clock). I usually use a 3mm allen key for this. Just slip the shorter side in the small hole behind the clutch. Also, make sure that front side of blade faces front (there is a marking).

Reply With Quote