Quote:
Originally posted by PiP
Thanks for the write up!
Step #3 is my main problem.
I dont know how to do that! 
|
3) Remove seat back from seat base.
The seat back is held to the seat base by four bolts, two on each side of the seatback frame, near the adjuster knob on the outside. And in a similar location on the inside of the seat.
There are 'boomerang-shaped' plastic trim pieces snapped on over the bolt/bracket areas. To remove the one that's on the adjuster side of the seat, you'll need to pull the adjustor knob/wheel. It just snaps off.
Hope this helps...