Car is 83SD. Just replaced front end suspension parts, usual suspects such as ball joint, brake support and upper control arm.

Did an alignment (shop with a Hunter machine). The fronts are all aligned to spec. However, the right rear toe is not in spec:
spec range (-0.08* to 0.75*), actual -0.15*

The left rear toe is OK, with reading of 0.14*
The Cross Camber of the rear is also within spec:
spec range (-1.0* to +1.0*), actual 0.8*

What is the usual suspect? Rear subframe mounts? Trailing arm bushings? Car has a slight pull to the right.

__________________
Shane83SD