hang on you may want to do it this way.

1 remove the coin tray just above the console below the ashtray.
(note: my tray may have already been loose if your coin tray won't come up then start with #2 the ashtray removal

2 remove the inner ash tray unplug the lighter.

3 you will see 2 screws holding the frame work in remove those and the frame work and you'll find you can remove the tray then lightly push forward a might on the console and it will then lift off.

4 now you can remove any switch you want. and if memory serves you can push them out from the top by holding the small plastic spring clip down while pushing

5 as the book says install is in the reverse order

good luck
craig

__________________
Thanks Much!
Craig

1972 350sl Red/Blk 117k
1988 420sel charcoal/Blk 140k
1987 420sel gold/tan 128k
See My Cars at:http://mysite.verizon.net/res0aytj/index.html

Pound it to fit then Paint it to match!

There is only First Place and Varying degrees of last!

Old age and deceit will overcome Youth and Enthusiasm every time!

Putting the square peg in the round hole is not hard... IF you do it fast enough!

Old enough to know better but stupid enough to do it anyway!