Quote:
Originally posted by MikeTangas
Warren,
PS: did you get the cc:mail I sent a couple weeks back? Asking because I know the ERO routers went down about the same time.
|
HI Mike, yes I did and I replied. I'll resend tonight when I get in.
The spindle is cooling it right now.
I replaced the upper ctl. arms and the bushings. The factory decided to put the bolt in from the back side, the area woth no room and lots of little pipes. I'm going to get my daughter who had thin arms to help me with the nut and bolt.
Lots of other things to do, like clean out my dryer vents. They are about 1/3 to 1/2 full of lint. It's a fire hazard like that!