I pulled my light out indicator bulb when I did my headlight mods.. I had it apart to put in the light height adjuster in the dash.

It was pretty easy to solder for me... Those holes in the connectors are HUGE. If you've got spares, you could just pull the old one off and then put both wires in a new one and solder.

I applied a little RMA flux to the existing solder, and heated. When it turned shinny, just put the extra wire in the hole. Everything flows out and remove the heat.

Yea- it was touchy juggling the stuff.

Michael

__________________
Michael McGuire
83 300d
01 vw A4 TDI
66 Chevy Corsa
68 GMC V6 w/oD
86 300E