I almost have everything ready
I didn't know about the cool harness but thanx for the info olpos.
Here is what I did. I got a relay that controls the fan, it's a heavy duty relay so it can handle the currents no problem. 12 gauge wire going from battery, fused of course to the relay, and from the relay to the fan.
Then I have a switch in the cabin, using 14 gauge wire, just because that's what I had handy, I have it grounded and connected to the relay, but I have a problem finding a power source for it.
At the moment it is hooked up, to the same place as the fan itself, there is a small socket box next to the battery, this is what I used. The switch is not fused, and it operates at any point, ignition on or off.
I was wondering if anyone knows a good ignition controlled power source for a small switch like this. I'm not sure how to exactly track this one down. I had the entire fusebox apart but that didn't help much.
Thanks so much for the input, this is the first mod I did to my car other then for repairs
xp