This past weekend while I was changing the transmission fluid and filter, I decided to check the wire that connects to the "Overload Protection Switch." When I unscrewed the sealed connector, the rubber boot broke. I called the parts department and was told the wire is $140ish dollars.

I'm not familiar with other transmissions but the 722.3 has the Overload protection switch/connector next to the vacuum modular valve. (Just to the left) It has a 2 pole connector with a screw cap. I wrapped the rubber boot with electrical tape for now.

Does anyone have "home fixes" or sources for used "odd" parts like this.

I'm not wanting to spend $140ish dollars for a wire with a sealed boot.