I agree with Mbenz, your tug-o-war probably pushed (or should I say pulled) the old cable's limit. Check PartsShop and/or FastLane for a replacement cable. One end is attached to the back of the speedo head and the other is attached to the speedo drive on the left side of the tranny, just above the crossmember. For ease of replacement, attach the speedo head end first, then attach to the drive gear. The rubber grommet you wish to replace came already mounted on my new cable.
Word of caution: The replacement cables are the exact length, there is no "extra slack", make sure you route the cable where the old one was, you should have no problem.
__________________
Mike Tangas
'73 280SEL 4.5 (9/72)- RIP
Only 8,173 units built from 5/71 thru 11/72
'02 CLK320 Cabriolet - wifey's mid-life crisis
2012 VW Jetta Sportwagon TDI...at least its a diesel
Non illegitemae carborundum.
|