Thread: New noise
View Single Post
  #1  
Old 09-13-2004, 09:30 AM
TonyFromWestOz's Avatar
TonyFromWestOz TonyFromWestOz is offline
"The Wizard of Oz"
 
Join Date: Jan 2004
Location: Perth, Western Australia
Posts: 834
Question New noise

I adjusted the valves on my '84 300D 6 weeks ago and everything seemed fine.
On Saturday, I went for a 250 km drive in the country, cruising at up to 145 km/h (somewhat over the 100 limit) Fatmobile III purred like a kitten, although somewhat rowdy kitten at that speed with the sunroof open.

Today I note that she has developed what I thought to be a tappet rattle (OK Cam follower noise). Sounds like a tic tic tic at the motor speed. While driving up the last km to home (up steep hill) the noise got noticable louder. It became a TIC TIC TIC, still at the same rate.
I thought that perhaps I had a loose valve adjuster nut, so tonight I pulled off the cam cover and checked the valve clearances. all OK.
After restarting the engine, the noise is still there, but after a few minutes of idling, a new, rattling noise started. I shutdown the negine. I restarted the engine after checking for obvious external problems without success. The TIC is still there, as loud as before, but I haven't heard the rattle again.

Can anyone shed some light?
The car has a genuine 286 000 km on the clock & burns negligible oil. There is no smoke at startup or at full power.
__________________
Tony from West Oz.
Fatmobile 3 84 300D 295kkm Silver grey/Blue int. 2 tank WVO - Recipient of TurboDesel engine.
Josephine '82 300D 390kkm White/Palamino int.
Elizabeth '81 280E, sporting a '79 300D engine.
Lucille '87 W124 300D non-turbo 6 cylinder OM603, Pearl Grey with light grey interior


Various parts cars including 280E, 230C & 300D in various states of disassembly.
Reply With Quote