According to the Hayes Manual for the LEFT seat:
Set the seat in the highest position, and push fully forward.
Disconnect the return spring.
Unscrew the bolt and pull out the side rail.
Unscrew the rear guide rail bolts.
(where applicable, on sedan models without height adjustment, remove bolt from the bracket at the side)
Set the seat to the lowest position and push it fully rearwards.
Unscrew the front guide rail bolts (and on coupe models disconnect the vacuum line to the automatic locking system), lift the seat front the vehicle.
Installation is in reverse of removal.
for the RIGHT seat: with the seat fully pushed forward,
Remove the bolt and pull out the side rail.
Remove both bolts from the side bracket.
Push set fully rearwards.
Remove the front guide rail bolts and lift seat from the vehicle.
Installation in reversal of removal.
2000 Ford 7.3 Powerstroke 4x4
2006 Mazda Tribute
1983 Black 300 D (donated to charity)
1993 Teal 300 D (160K) Sold
"I love the smell of burnt diesel fuel in the morning, it smells like ....VICTORY"