Hmmm, maybe I am wrong then. The entire rear suspension hangs on the rear subframe which is attached to the body with a three point mount consisting of two subframe mounts at the front on each side and the rear differential mount. I have removed the rear differential mount to take the diff cover off to change axles. While my mount was old I didn't really see how it could settle enough to affect ride height. I can see how if all the mounts were really shot the rear subframe would move around and cause weird handling and tire wear. I think I will have to go have a look again to see how this may be possible. RT

__________________
When all else fails, vote from the rooftops!
84' Mercedes Benz 300D Anthracite/black, 171K
03' Volkswagen Jetta TDI blue/black, 93K
93' Chevrolet C2500HD ExCab 6.5TD, Two-tone blue, 252K