Quote:
Originally Posted by jp233
ok so I got the panel off, but now how do I apply power to tell the regulator to put the window UP ?
so I've got purple, blue, brown and green with white stripe coming from the car to the switch receptacle, and just green and black going to the unit.
obviously I can just tap into the green for power, but I dont want to risk the window going DOWN any further....
|
Take the cover off the plug and remove the green and black wires, with 'tubes', going to the motor. As a precaution, jot down the wire colors and the corresponding numbered connections in the plug, as they tend to pop out suddenly and you won't know which goes back where! Then, from a power source, attach + and - 12V to either raise or lower the window.