Peter, I am speaking of the connection for the controller/regulator connection above teh firewall. There are 3 wires, red, black, and yellow. I've read the yellow should read anywhere from 1-7volts. When I checked the yellow with a test light, it didn't luminate. Would that much power be enough to light up the test light? The red tested out ok, but yellow was nothing. So I thought maybe to run a wire from the red and black to their respective locations at the blower motor itself, thus bypassing the regulator.

What do you think?

Thanks
David

__________________
_____________________________________________

2000 Honda Accord V6 137k miles

1972 300SEL 4.5 98k miles

_____________________________________________