|
I took a very small drill bit to do mine. Drilled a little hole next to the ball while covering everything else to not get metal shavings anywhere and then used a very small tipped screw driver to pry the ball up. Then again that was because I had stupidly put the ball in instead of giving it time to adjust and all after I replaced my lambda tower. You are supposed to buy a new tower to do this, since they are only like 12-15 bucks!
__________________
~Jamie
_________________
2003 Pewter C230K SC C1, C4, C5, C7, heated seats, CD Changer, and 6 Speed. ContiExtremes on the C7's.
1986 190E 2.3 Black, Auto, Mods to come soon.....
|