Quote:
|
Originally Posted by Hatterasguy
Their is a big bolt in the center of the fan that has to come out. Slide the plastic guard back and stick an 8mm allen wrench in the head of the bolt. Kind of a pain but I after you do it a few times it is simple.
|
Their are two little metal clips that hold the top of the fan guard in pop them out, lift it up a bit to get the tabs on the bottom of the guard out and slide it back over the fan. Plenty of room.
I have had my fan clutch out probably about a dozen times, thats how it comes out the radiator does not need to be moved.
Remember the W124's engine compartment is different then the W126's some of the procedures will be different because their is less space in the W124's bay. For example the oil filter canister is different, the radiator is also not the same.