Good luck....

Been there last Saturday. Unless you've got a fancy Stallwillie or they revised the lift bracket.... revise your game plan.

You'll need to take the 2 6mm allen bolts out and rotate the bracket out of the way. The bracket has the water oulet for the head.. so if you do it carefully- it won't leak. If not, drain the coolant and replace the o-ring seal while you are at it.

Looking at mine- the coolant gauge sensor is out of range by a similar amount. The fan switch- I cannot remember it comming on even parking the car in 100F weather. So, I'm guessing that isn't right and it needs replacing too.

There are seals underneath the sensors...

Makes me wonder about the sensor on the intake too...

Michael

__________________
Michael McGuire
83 300d
01 vw A4 TDI
66 Chevy Corsa
68 GMC V6 w/oD
86 300E