Quote:
|
Originally Posted by pawoSD
......Also, what is the most effective way in getting the oil cooler line bolts off of the oil filter housing?
|
When I pulled mine, I made a flare nut wrench out of a 1 1/16" box end from harbor freight. It worked like a champ. Be sure and use a backer wrench on the coupler that screws into the oil filter housing. If you cannot find a line wrench, you may have to grind down a wrench and make it thinner. This is a job where the inexpensive wrenches can be modified without sweating the cost of a replacement.
