Quote:
|
Originally Posted by Strife
...One thing I've noticed about lifts (but maybe not all of them): if you leave the top hanging, they will almost always distort the rubber seals permanently. This is why I had to replace mine, the PO did this...
|
Several of the systems I have looked at for the 107 are designed to clamp onto the rain gutter, rather than sling under the rubber window molding... One system I saw, and recreated, was designed to hook underneath the bottom of the top at three places, in the dead center of the back lower edge, underneath the quarter windows next to the attachment points, and in the center of the front edge of the roof. The best system of support I saw used large, circular "buffing pad" like fixtures to support the roof just inside the rubber molding... Kinda neat. IF you need sketches, or links (if I can find them) PM with your e-mail address...
I was just not comfortable with the idea of 90+ pounds hanging above my car, body, anything else that should pass beneath.