Quote:
hey that might be my problem. i had broken gear of the governer. i just replaced that and ever since everything looks good. i could not find anything else wrong. can you guide me how to check what caused that ? i mean how do i know where check valve and or anything else that might have caused it? or what might be wrong with them?
Can you post a picture on the governor, it the gear is damaged, you should change the drive gear on the out putshaft.
|
i need help removing my governor (1986 300e 722.320 transmission)
The release for the governor is on the rear pump; look at page 50, fig. 42 of your link. They call it the axial retainer nut. Remove the 10mm nut and turn the screw CCW to release the governor, turn it CW when you install it, the slot in the screw should be in a horizontal position; locked.