An update.


After discovering metal shavings around the clutch pully, saw that the pully was rubbing against the crankshaft pully, slowly sanding off the metal exposing the aluminum below. Anyway when I was moving the fan back and fourth I saw no movement, well I attempted to lift the clutch pully with my hand, as to move it up, it actually moved quiet a bit. When I took the belt off, it was apparent that the bearings have been worn out.


I am going to need a new pully as well, because the edges on the pully (aft side) have been worn down. I already have a new clutch on the way. I am wondering tho, is it possible to repair the bearings in the bracketery. I mean there must be a way instead of replacing the whole unit.....????


Any thoughts....

__________________
190e 2.6 1990. 300,000 KM
C230 K 2000, 130,000 KM