|
Brandon,
Nice job on the website. I chose to remove the rear IP supoport bracket from the engine block and leave the VCV, shut down , and rack damper, in place on the IP. With the rear bracket out you can remove the front three bolts and grab the IP by the ALDA an pull up and back. I didn't remove the heater hose either but it is rather tight. Here is a pic of my test setup with a ford probe/ mazda MX6 intercooler
__________________
Bob D.
Parrish, FL
1 SDL, 1 D, 1 TD, 1 Mog
|