View Single Post
Old 05-21-2001, 08:08 AM
ctaylor738 ctaylor738 is offline
Super Moderator
Join Date: Apr 2000
Location: Falls Church, VA
Posts: 5,318
Crew -

Started on engine removal on the 280C this weekend. Removed the radiator, started on declutching fan. The CD says to remove a bolt in the middle of the hub, but mine has a tab that covers a pin and a bushing that the pin fits into.

Removed the tab, and the pin. There does not seem to be anything else to remove, and the hub will not budge.

Do I need to go after the bolts that hold the pulley on the water pump or is there a trick with the fan hub?

Am also going to post this on the main board since there are a number of 110-heads there.


Reply With Quote