View Single Post
Old 06-07-2001, 12:49 PM
mbdoc mbdoc is offline
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
Most wheel and OR spring makers have NO idea on OE or lowered alignment specs! ON your car there is a very limited amount of adjustment, due to off-set washers instead of adjustment cams. TRY to have the alignment checked & have the **camber** set where it is NO lower than -0.8deg. The caster & toe-in values should remain the same(close) as non-lowered.
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote