just a brain.

first. get an adaptor for the fuel injector holes. second get a compression tester for diesels.

third remove injectors and hard lines and put a rag over the injection pump to catch the fuel.

fourth screw in adaptor attach compression tester and crank the motor over about three or four times. record number from tester and release pressure.

repeat for each cylinder.

replace all removed parts.

values will be for cold or hot compression. make note of whether you are testing cold or hot.

prob take less than an hour.

tom w

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.