Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Car Audio and Multimedia

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-25-2004, 01:44 PM
ned2683's Avatar
Registered User
 
Join Date: Oct 2001
Posts: 693
Alarm System?

I was wondering if anybody here knows anything about alarm systems. since a lot of older cars don't come with them (123, 126) i was thinking i could put one it by myself instead of hiring them to rip me off.

basically what i want is a security system with remote doors.

i was thinking i could put a remote door unlockers too if i just install a linear actuator on the driver side to pull up on the lock and it should unlock eveything else.

how are the wirings on security systems? are they universal like radio wirings? how hard is it to put one of these in these older cars?
__________________
198? 300D ???K - Future DD
1989 300TE 285K - traded in '12
1984 300SD 186K - Sold in 08
1978 300SD 330K - Died in 05
Reply With Quote
  #2  
Old 06-25-2004, 04:36 PM
Benz300's Avatar
Benz Enthusiast
 
Join Date: Sep 2003
Location: new jersey, usa
Posts: 805
you wont save more than 35 dollars if you did it yourself. these days the cost is around 170 to have it installed, i'm referring to a DEI valet remote starter with auto door lock capabilities. the alarm of the car itself would work with it if you had the built in alarm otherwise you're looking around 300 to 350 for the whole system with alarm. doing it yourself wont help because that voids the life time warranty by the manufacturer. so why would you waste about 6 to 7 hours of your time when you can get it all done by them for about 50 bucks or so max ?
hope this answers your question.
__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford.
Reply With Quote
  #3  
Old 06-25-2004, 04:53 PM
ned2683's Avatar
Registered User
 
Join Date: Oct 2001
Posts: 693
Quote:
Originally posted by Benz300
you wont save more than 35 dollars if you did it yourself. these days the cost is around 170 to have it installed, i'm referring to a DEI valet remote starter with auto door lock capabilities. the alarm of the car itself would work with it if you had the built in alarm otherwise you're looking around 300 to 350 for the whole system with alarm. doing it yourself wont help because that voids the life time warranty by the manufacturer. so why would you waste about 6 to 7 hours of your time when you can get it all done by them for about 50 bucks or so max ?
hope this answers your question.
I never heard of any place installing it for less than 100 bucks. my car doesn't have a factory alarm. so the store wants $199 for he basic alarm (mind you this is the cheapest one) and if i want remote doors with would be a lot more. they also charge MSRP for their alarm system. i was thinking if i could buy one off ebay and install it my self it would be a lot cheaper.

its kinda like installing a cd player, the stores wants 75 bucks for it (1.5 hours at 50 bucks an hour) but i could do it for free! it be cool to learn how to do it too.
__________________
198? 300D ???K - Future DD
1989 300TE 285K - traded in '12
1984 300SD 186K - Sold in 08
1978 300SD 330K - Died in 05
Reply With Quote
  #4  
Old 06-25-2004, 05:11 PM
Benz300's Avatar
Benz Enthusiast
 
Join Date: Sep 2003
Location: new jersey, usa
Posts: 805
here in NJ one of the best DEI remote starters are 179 installed. perhaps the prices are different where you live.
good luck.
__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford.
Reply With Quote
  #5  
Old 06-25-2004, 07:05 PM
jbaj007's Avatar
Registered User
 
Join Date: Jun 2001
Location: Santa Monica, CA
Posts: 2,053
ned,

Your plan is perfect. At least it worked perfectly for me. The electric actuator to operate the driver's door (and therefore all the others) is neccessary on '84 and older as you have already surmised. I used a cheap Bulldog system, but anything that works the new electric actuator will work. The door switch will then actuate the vacuum locks. Since you're not actuating the vacuum pump directly (ike the '85 up technique) I don't see why you would need the three second signal that it calls for, but many alarm systems come with it anyway if you want to be sure.

I wired mine with interface to the factory alarm (mine still worked, but obviously there was no remote in 1984). If I did it again I'd do it with the new system only, as you propose. Wasn't difficult at all. Take care with the position of your piggy back electric actuator and creative bends to it's rod.
__________________
The Golden Rule

1984 300SD (bought new, sold it in 1988, bought it back 13 yrs. later)
Reply With Quote
  #6  
Old 08-30-2004, 01:02 AM
Registered User
 
Join Date: Oct 2002
Posts: 45
Ned, how did your install go????
Harold
Reply With Quote
  #7  
Old 08-30-2004, 09:24 AM
ned2683's Avatar
Registered User
 
Join Date: Oct 2001
Posts: 693
Quote:
Originally Posted by Harold in NC
Ned, how did your install go????
Harold
I ended up going to a store to do this. some of the stores around town wanted $250+ saying that it was hard to install. one store i went to said it would be $120 installed. they used 3 hours (instead of 1 1/2 for normal cars) but charged a set rate. they also said they wanted $40 for a remote door. they did a professional install and i am very pleased with it.

so yeah i pussed out and took it to the store
__________________
198? 300D ???K - Future DD
1989 300TE 285K - traded in '12
1984 300SD 186K - Sold in 08
1978 300SD 330K - Died in 05
Reply With Quote
  #8  
Old 09-02-2004, 12:20 AM
Registered User
 
Join Date: Oct 2002
Posts: 45
Guys, is there some advantage to adding an actuator rather than using the three second lock/unlock remote pulse?
Harold
Reply With Quote
  #9  
Old 10-27-2004, 12:50 AM
"Da Benzito"
 
Join Date: Oct 2004
Location: Durham, NC
Posts: 106
Out of curiosity what part of NC do you live in?? Because I live in NC too. Anyway DEI is definently the way to go when it comes to alarms, they make the best. I had to find this out the hard way though. After having a top of the line Alpine alarm attempted to be installed on my car, four hours later, I found the alarm wouldn't work. Apparently, at least on my mercedes, the alarm output must send a signal to the vacuum pump to unlock or lock the doors for at least 3 seconds. The highest was about 2.5 seconds. This meant that the Alpine alarm could not lock or unlock the doors. Sometimes it could unlock the doors if you tried a few times, but I never saw it lock the doors. The DEI unit on the other sends the signal for 3.3 seconds I think (more than 3 I know) so the lock and unlock feature works great. The DEI unit I purchased, which was a top of the line model at the time functions great. The only time I have ever had problems with it, it was because I messed it up, trying to power police strobes without a relay, but it was replaced for free under warranty. DEI offers a lifetime warranty on their alarms. As to your getting charged for installation,did you go to a smaller audio shop. Because I know everywhere I priced alarms, installation was always included. In fact you could not even by the alarm by itself, installation was included in the price. Go to Best Buy, the now carry viper and other dei brands such as sidewinder and python. You should be able to get a good model which includes an alarm and remote entry for around $225 installed. If you have any more alarm questions just let me know and I'll be glad to help you.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:22 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page