|
|
|
#1
|
|||
|
|||
hood liner replacement
what did you use to hold the hoodliner to the hood while the adhesive sets?
i have a 4x6 foil backed hoodliner (aftermarket) that i cut and test fit, but my spring clamps/regular clamps wont work well they 'crush and rip' the aluminum facing. ive got 3m 90 adhesive, and i dont want to take hood off and (realign it) tips? |
#2
|
|||
|
|||
Spray adhesive on both the hood and the liner. Install the liner with the hood vertical and let the adhesive dry. Once the liner contacts the hood it won't move so dry fit and mark it first to assure it's aligned properly.
__________________
Fred Hoelzle |
#3
|
||||
|
||||
The correct adhesive is a contact cement. Once it's on, you shouldn't need to clamp it with anything.
__________________
" We have nothing to fear but the main stream media itself . . . ."- Adapted from Franklin D Roosevelt for the 21st century OBK #55 1998 Lincoln Continental - Sold Max 1984 300TD 285,000 miles - Sold The Dee8gonator 1987 560SEC 196,000 miles - Sold Orgasmatron - 2006 CLS500 90,000 miles 2002 C320 Wagon 122,000 miles 2016 AMG GTS 12,000 miles |
#4
|
||||
|
||||
Cover you windshield and fenders before spraying hood. Don't ask
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#5
|
||||
|
||||
I stood on my shock towers and used a 6" paint roller to ensure a good bond everywhere with the hood open to 90˚. Mark the center of the hood top and bottom (or front and back). After you use the 3M 08090, fold the pad in half and apply the crease on the marks. Then open it up (like a book) and roll it on.
Don't skimp on the 3 coats on the hood and 3 coats on the pad. I used about 1-1/2 cans.
__________________
Chad 2006 Nissan Pathfinder LE 1998 Acura 3.0 CL OBK#44 "Pleasure in the job puts perfection in the work." - Aristotle (384-322 B.C.) SOLD 1985 300TD - Red Dragon 1986 300SDL - Coda 1991 - 300TE 1995 - E320 1985 300CD - Gladys |
#6
|
||||
|
||||
So, what did YOU use to clean off the overspray?
__________________
" We have nothing to fear but the main stream media itself . . . ."- Adapted from Franklin D Roosevelt for the 21st century OBK #55 1998 Lincoln Continental - Sold Max 1984 300TD 285,000 miles - Sold The Dee8gonator 1987 560SEC 196,000 miles - Sold Orgasmatron - 2006 CLS500 90,000 miles 2002 C320 Wagon 122,000 miles 2016 AMG GTS 12,000 miles |
#7
|
||||
|
||||
http://www.gcvisel.650dialup.com/Benz/Maintenance/Hood_Pad.html
If I had to do it by myself, I would use some cardboard battens or plastic sheeting held in place by quick clamps, to make sure I had every thing squared up before the two surfaces are joined. You can get somewhat of an idea from counter top laminating... http://www.thisoldhouse.com/toh/how-to/step/0,,20164366_20377721,00.html
__________________
1999 E300DT (131,800) 154,000 Black on Black SOLD 2006 CLK 500 coupe Capri Blue on Grey (zoom,zoom) 47,000mi 04 VW TDI Passat 80,000mi (Techno) How to eliminate oil dependency through market-driven approaches. “We could cut oil use in half by 2025, and by 2040, oil use could be zero,” The Sound of Diesel Speed Ode to MB |
#8
|
|||
|
|||
I had good luck with Ronson lighter fluid. Cheaper and worked better than the contact cement thinner/cleaner I also used.
__________________
1986 560SL 2002 Toyota Camry 1993 Lexus |
#9
|
||||
|
||||
I have to reglue both of mine. I was thinking of using Weldwood Contact Cement this time. The 3M stuff apparently didn't hold well enough.
__________________
" We have nothing to fear but the main stream media itself . . . ."- Adapted from Franklin D Roosevelt for the 21st century OBK #55 1998 Lincoln Continental - Sold Max 1984 300TD 285,000 miles - Sold The Dee8gonator 1987 560SEC 196,000 miles - Sold Orgasmatron - 2006 CLS500 90,000 miles 2002 C320 Wagon 122,000 miles 2016 AMG GTS 12,000 miles |
#10
|
|||
|
|||
i washed and degreased with rim cleaner the underside of hood, will see about contact cement tmrw,
shes not pretty yet but will be soon! i have to open hood at least once a week to add oil, tired of seeing grimy remains of old liner! |
#11
|
|||
|
|||
i used whole can of cc and 1.5 cans of cheap spray adhesive, darn amazon never sent me 3m 90! i brushed cc on both hoodliner and approx the hood where it would go in a big outline shape and sprayed the glue everywhere else ta da! i put one small rip installing it, but i think ill throw an EBC brake sticker over it, stickers add HP ......... ez to do if youre considering it |
Bookmarks |
|
|