|
|
|
#1
|
|||
|
|||
300D seat bottom only fit into 300CD?
Hi all - I have a 1984 300CD with a worn out drivers seat bottom and a member has a good seat bottom with new springs from an 85 300D for sale. Is the 300D seat a direct bolt-in to the 84 300CD? Thanks for any direction.
Daryl |
#2
|
||||
|
||||
It may because it's also from a w123 but you'll need coupe seats for the vacuum lockout feature on the backrest.
__________________
http://farm8.staticflickr.com/7271/7...144c3fc1dc.jpg |
#3
|
|||
|
|||
No. The coupe seat base is longer than the sedan. There are apparently no more dealer-supplied replacement seats in the US, a few in Germany - and they're pretty darn pricey. You can try the pool noodle technique (do a search); there's another vendor that makes a seat repair spring kit; or you can disassemble the bases and swap the driver for the passenger since they're symmetrical.
Panzzer up in DFW has a few coupes, maybe a good seat base or two. Look for his threads in parts for sale. Welcome to the forum. |
#4
|
|||
|
|||
Quote:
|
Bookmarks |
|
|